Materials and Tools Used
- 220-grit sandpaper
- 400-grit sandpaper
- 600-grit sandpaper
- Automotive body filler (putty)
- Red putty
- Black primer
- Automotive paint
- Paint thinner
- Spray gun
- Paint filter
- Compressed air
- Masking paper
- Masking tape
- Water for wet sanding
- Cleaning materials
Introduction
This Hyundai Elantra came to the workshop with damage to the rear fender and bumper. The repair involved removing the tail light, repairing the fender dents, fixing the bumper, and adjusting the fitting. After completing the denting work, the tail light was refitted and aligned properly.
The Hyundai Elantra rear fender was repaired using denting techniques. The bumper was repaired and adjusted for proper fitting. After the denting work was completed, the tail light was refitted and aligned correctly.
 |
| Hyundai Elantra rear fender and bumper repair. |
Hyundai Elantra Rear Fender Dent Repair, Bumper Fitting, and Paint Preparation
The Hyundai Elantra's rear fender was repaired using denting techniques. The bumper was repaired and fitted correctly, and the tail light was reinstalled. After completing the denting work, the rear fender and bumper were ready for body painting.
 |
Hyundai Elantra Rear Fender Denting Repair
|
Hyundai Elantra Rear Fender and Bumper Putty Work Before Painting
After completing the denting work, the repaired areas of the Hyundai Elantra’s rear fender and bumper were sanded using 220-grit sandpaper with water. The surfaces were then cleaned, and the old putty was removed from the damaged areas where the body surface needed further repair.
New body filler was applied to the repaired areas to smooth out the surface. After the filler dried, it was sanded to achieve an even finish. Red putty was then applied over the repaired areas to fill small imperfections, followed by sanding with 400-grit sandpaper.
Once the putty work and sanding were complete, compressed air was used to remove dust and moisture. Finally, the rear fender and bumper were masked with paper to protect the surrounding areas and prepare them for painting.
 |
| Hyundai Elantra Rear Fender and Bumper Putty Sanding and Paint Preparation |
Black Primer Application on the Hyundai Elantra Fender and Bumper
Black primer was prepared by mixing it with thinner to achieve the correct consistency. The primer was then applied to the repaired areas of the rear fender and bumper where the putty work had been completed.
After the primer had dried for approximately one hour, the primed surfaces were sanded using 600-grit sandpaper to create a smooth finish. The surfaces were then cleaned to remove sanding dust.
After completing the primer application, sanding, and cleaning, the Hyundai Elantra’s rear fender and bumper were ready for the painting process.
 |
| Hyundai Elantra Rear Fender and Bumper Black Primer Application |
Painting the Hyundai Elantra Rear Fender and Bumper
The paint was mixed with thinner to achieve the proper consistency. The mixture was then filtered and poured into the spray gun. Painting began on the Hyundai Elantra’s rear fender and bumper, applying three to four coats of paint to achieve even coverage across the repaired surfaces.
 |
| Hyundai Elantra Rear Fender and Bumper After Painting |
The paint was mixed with thinner to achieve the proper consistency. The mixture was then filtered and poured into the spray gun. Painting began on the Hyundai Elantra’s rear fender and bumper, applying three to four coats of paint to achieve even coverage across the repaired surfaces.
Final Result: Hyundai Elantra Rear Fender and Bumper Painting
After completing the painting process, the Hyundai Elantra’s rear fender and bumper were left to dry. The repaired areas now had a fresh coat of paint. This completed the dent repair, putty application, primer sanding, and painting stages of the repair work.
Before and After: Car Fender and Bumper Repair
The before-and-after photos show the damaged fender and bumper before repair and the finished appearance after restoration. The damaged areas were repaired, sanded, and painted to achieve a smooth finish that matches the car’s original color.
 |
| Car Fender and Bumper Repair Before and After |
Comments
Post a Comment
Please Do Not Spam...../